Get 15% off when you trade in your ladder.
Choose your ladder
Eligible
Crafted using premium aluminium alloy with TIG-certified welds for improved durability
High safety standards and compliance with major European norms
Designed for overhead transmission work with robust execution and ergonomic comfort
Still climbing on borrowed time?
If your ladder is pushing the limits of age, wear, or compliance, now’s the perfect time to make a smart switch.
Hand in your old or out-of-cert ladder and step up to a premium, European-made ladder.
Built for high-risk live-line and overhead work, TEMA ladders deliver certified safety, lightweight strength, and ergonomic performance that’s trusted worldwide. Because when it comes to height safety, second-best just won’t do.
Ladder Safety Checklist
Essential checks for ladders used in live line and overhead work.
☐ Inspect Before Every Use
Check for cracked welds, loose rungs, dents, or structural damage.
☐ Test Annually
Ensure your ladder remains safe, compliant, and certified.
☐ Replace When Required
Replace every 5–7 years, or immediately if it fails inspection or testing.
Upgrade your old live‑line ladder for a new TE.M.A ladder via HTC, New Zealand’s distributor for TE.M.A equipment
TE.M.A’s ladders are built of lightweight TIG‑welded aluminium alloy, certified to UNI CEN/TS 16415:2013, UNI EN 795:2012, and compliant with EU 2016/425 PPE regulations.
They feature skid‑proof rungs, galvanized safety hooks, and a 300 daN vertical working load
017 WORKING PLATFORM
Categories: Electrical Transmission
RECTANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof floor “Graepel Gripp system”. galvanized foldable and twisting hooks; double swivel hook (tower side), single hook with nylon roller (conductor side).
– Standard length 12m (4+4+4), other lengths upon request.
– Horizontal working load 300 daN.
– Weight 153 kg.
014 LADDER FOR STEEL AND CONCRETE POLE CLIMBING
Categories: Electrical Transmission
ALUMINUM LADDER WITH SAFETY DEVICE FOR STEEL AND CONCRETE POLE CLIMBING
Suitable for climbing circular and polygonal poles.
For quadrangular poles a special configuration is available upon request.
Made of welded light aluminum alloy (certified TIG system) with skid-proof rungs.
Certified according to UNI CEN/TS 16415:2013, UNI EN 795:2012 regulations and in compliance with EU 2016/425 regulation.
Modular structure with base and top sections and as many intermediate elements as needed to reach the desired length (up to 30m).
The ladder is equipped with two anti-fall devices with anchoring points for operator’s safety belt.
An aluminum alloy service platform for the operator is also available upon request.
Working load: 150 daN
*Higher capacities upon request
NOTE:
To prevent undesired torsions on the structure while operating on high poles (above 30m), a chain-locking device is also available on request. (Mod. 014/BIP).
Weights with standard accessories:
– Self-supporting base 014/B – 5.5 kg
– Intermediate element 014/I – 6 kg
– Upper part element 014/C – 6.5 kg
– Service platform 014/PL – 1 kg
013-TP WORKING PLATFORM
Categories: Electrical Transmission
TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Provided with galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
013-G.GG E 013-TP.GG WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR/TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized foldable and twisting hook Mod. AGG/SS (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Horizontal working load 200 daN (triangular) or 300 daN (trapezoidal).
– Vertical working load 300 daN.
013-G WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized steel hook with safety chain (tower side) and swivelling/foldable hook
Mod. AG/SS (conductor side).
– Horizontal working load 200 daN.
– Vertical working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
011-G SUSPENSION LADDER-PLATFORM
Categories: Electrical Transmission
Suitable for operations on overhead transmission lines, usable both horizontally and vertically.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Complete with interchangeable galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 100 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Reinforced structure with horizontal working load of 200 daN.
How does it work?
1. Contact HTC
Contact our team and select the TEMA ladder that best suits your work.
2. Bring In Your Old Ladder
Trade in your old, damaged, or out-of-cert ladder.
3. Receive 15% Off
Get 15% off your new TEMA ladder when you trade in.
4. Climb with Confidence
Take home a certified, European-made ladder built for safe, reliable live-line and overhead work.
Explore the T.E.M.A. Range
038-1C BICYCLE FOR SINGLE CONDUCTOR
Categories: Electrical Transmission
Cart version, suitable for warning spheres and spacers installation on single conductor overhead lines.
Made of welded light aluminum alloy (certified TIG system)
Main features:
– Cardan joint transmission system;
– Dynamic Negative brake system;
– Stationary brake device;
– Low transmission ratio to reduce effort on pedals;
– Maximum inclination 30%;
– Adjustable seat;
– Aluminum sheaves on ball-bearing;
– Counter meter device.
Working load/pay load: 150 daN
Weight: 67 kg
036-M MOTORIZED INSPECTION TROLLEY
Categories: Electrical Transmission
Available for 2, 3 or 4 bundled conductor configurations.
Single lineman’s cart with mechanical motorized-driven traction system.
Made of tubular aluminum alloy welded structure (certified TIG system)
Features and performances:
– 2 stroke 50cc gasoline engine 2.4 HP (1.8 kW);
– Max speed 20 m/min (both directions);
– Max slope 25% (15°);
– Mechanical transmission, reversing drive direction with idle position;
– Transmission axle with rubber wheels for high adherence;
– Supporting and positioning cross-arms with aluminum wheels on ball-bearings;
– N° 2 stationary brakes, safety frame ropes and counter meter device.
Upon request:
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Anchoring point in compliance with UNI EN 795:2012.
036 INSPECTION TROLLEY
Categories: Electrical Transmission
Suitable for 2, 3 or 4 bundled conductor configurations.
1 lineman towable trolley, with two cross-arms and a positioning bar complete with aluminum wheels on ball-bearings, anti-slip floor, n°2 stationary brakes, safety frame ropes and counter-meter device.
Made of welded aluminum alloy (certified TIG system).
Upon request:
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Anchoring point in compliance with UNI EN 795:2012.
035-L INSPECTION TROLLEY
Categories: Electrical Transmission
2 linemen towable trolley with large aluminum wheels (Ø 350mm) on ball-bearings with Nylon liners, anti-slip floor, n°2 stationary brakes, safety frame ropes and counter meter device.
Made of welded aluminum alloy (certified TIG system).
Completed with balancing wheels to allow the operator to work on the cantilever (so called “balcony”).
Upon request:
– Dynamic disc brake device;
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Anchoring point in compliance with UNI EN 795:2012.
035 INSPECTION TROLLEY
Categories: Electrical Transmission
1 or 2 linemen towable trolley, complete with aluminum wheels on ball-bearings, anti-slip floor, n°2 stationary brakes, safety frame ropes and counter meter device.
Made of welded aluminum alloy (certified TIG system).
Upon request:
– Dynamic disc brake device;
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Anchoring point in compliance with UNI EN 795:2012.
034-M-4 MOTORIZED INSPECTION TROLLEY
Categories: Electrical Transmission
This model is designed for overpassing existing spacers.
Suitable for 2,3 or 4 bundled conductor configurations.
2 linemen towable trolley, with aluminum wheels mounted on four cross-arms and 1 positioning bar, anti-slip floor, n°2 stationary brakes, safety frame ropes and counter-meter device Hydraulic driven transmission, aluminum traction wheels with rubber liners.
Made of welded aluminum alloy (certified TIG system).
Features and performances:
– 4 stroke gasoline engine – 4 hp (2.95 kW);
– Max speed 30 m/min (both directions);
– Maximum slope 40% (22°).
Upon request:
– Nylon wheels;
– Earthing device;
– Openable and articulated arms;
– “Custom-made” size available;
– Lifting/positioning device Mod. DT034MDSR;
– Anchoring point in compliance with UNI EN 795:2012.
034-M-2 MOTORIZED INSPECTION TROLLEY
Categories: Electrical Transmission
LINE CARTS / INSPECTION TROLLEYS FOR BUNDLED CONDUCTORS
Suitable for 2, 3 or 4 bundled conductor configurations.
2 linemen towable trolley, with two cross-arms and a positioning bar complete with aluminum wheels on ball bearings, anti-slip floor, N°2 stationary brakes, safety frame ropes and counter-meter device.
Made of welded aluminum alloy (certified TIG system).
Upon request:
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Lifting/positioning device Mod. DT034MDSR
– Anchoring point in compliance with UNI EN 795:2012.
034-4 INSPECTION TROLLEY
Categories: Electrical Transmission
LINE CARTS / INSPECTION TROLLEYS FOR BUNDLED CONDUCTORS
This model is designed for overpassing existing spacers.
Suitable for 2,3 or 4 bundled conductor configurations.
2 linemen towable trolley, with four cross-arms and one positioning bar complete with aluminum wheels on ball-bearings and anti-slip floor, N°2 stationary brakes, safety frame ropes and counter-meter device.
Made of welded aluminum alloy (certified TIG system).
Upon request:
– Nylon wheels;
– Earthing device;
– Openable and articulated arms;
– “Custom-made” size available;
– Lifting/positioning device Mod. DT034MDSR
– Anchoring point in compliance with UNI EN 795:2012.
034-2 INSPECTION TROLLEY
Categories: Electrical Transmission
LINE CARTS / INSPECTION TROLLEYS FOR BUNDLED CONDUCTORS
Suitable for 2, 3 or 4 bundled conductor configurations.
2 linemen towable trolley, with two cross-arms and a positioning bar
complete with aluminum wheels on ball bearings, anti-slip floor, N°2
stationary brakes, safety frame ropes and counter-meter device.
Made of welded aluminum alloy (certified TIG system).
Upon request:
– Nylon wheels;
– Earthing device;
– “Custom-made” size available;
– Lifting/positioning device Mod. DT034MDSR
– Anchoring point in compliance with UNI EN 795:2012.
032 INSPECTION TROLLEY
Categories: Electrical Transmission
LINE CART / INSPECTION TROLLEY FOR SINGLE CONDUCTOR
1 lineman towable trolley complete of nylon wheels on ball-bearings, stationary brake, footrest and nylon traps for back support.
Made of welded aluminum alloy (certified TIG system).
Payload: 100 daN
Weight: 12 kg.
Upon request:
– Counter meter device;
– Aluminum wheels.
017 WORKING PLATFORM
Categories: Electrical Transmission
RECTANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof floor “Graepel Gripp system”. galvanized foldable and twisting hooks; double swivel hook (tower side), single hook with nylon roller (conductor side).
– Standard length 12m (4+4+4), other lengths upon request.
– Horizontal working load 300 daN.
– Weight 153 kg.
014 LADDER FOR STEEL AND CONCRETE POLE CLIMBING
Categories: Electrical Transmission
ALUMINUM LADDER WITH SAFETY DEVICE FOR STEEL AND CONCRETE POLE CLIMBING
Suitable for climbing circular and polygonal poles.
For quadrangular poles a special configuration is available upon request.
Made of welded light aluminum alloy (certified TIG system) with skid-proof rungs.
Certified according to UNI CEN/TS 16415:2013, UNI EN 795:2012 regulations and in compliance with EU 2016/425 regulation.
Modular structure with base and top sections and as many intermediate elements as needed to reach the desired length (up to 30m).
The ladder is equipped with two anti-fall devices with anchoring points for operator’s safety belt.
An aluminum alloy service platform for the operator is also available upon request.
Working load: 150 daN
*Higher capacities upon request
NOTE:
To prevent undesired torsions on the structure while operating on high poles (above 30m), a chain-locking device is also available on request. (Mod. 014/BIP).
Weights with standard accessories:
– Self-supporting base 014/B – 5.5 kg
– Intermediate element 014/I – 6 kg
– Upper part element 014/C – 6.5 kg
– Service platform 014/PL – 1 kg
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
