Get 15% off when you trade in your ladder.
Choose your ladder
Eligible
Crafted using premium aluminium alloy with TIG-certified welds for improved durability
High safety standards and compliance with major European norms
Designed for overhead transmission work with robust execution and ergonomic comfort
Still climbing on borrowed time?
If your ladder is pushing the limits of age, wear, or compliance, now’s the perfect time to make a smart switch.
Hand in your old or out-of-cert ladder and step up to a premium, European-made ladder.
Built for high-risk live-line and overhead work, TEMA ladders deliver certified safety, lightweight strength, and ergonomic performance that’s trusted worldwide. Because when it comes to height safety, second-best just won’t do.
Ladder Safety Checklist
Essential checks for ladders used in live line and overhead work.
☐ Inspect Before Every Use
Check for cracked welds, loose rungs, dents, or structural damage.
☐ Test Annually
Ensure your ladder remains safe, compliant, and certified.
☐ Replace When Required
Replace every 5–7 years, or immediately if it fails inspection or testing.
Upgrade your old live‑line ladder for a new TE.M.A ladder via HTC, New Zealand’s distributor for TE.M.A equipment
TE.M.A’s ladders are built of lightweight TIG‑welded aluminium alloy, certified to UNI CEN/TS 16415:2013, UNI EN 795:2012, and compliant with EU 2016/425 PPE regulations.
They feature skid‑proof rungs, galvanized safety hooks, and a 300 daN vertical working load
017 WORKING PLATFORM
Categories: Electrical Transmission
RECTANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof floor “Graepel Gripp system”. galvanized foldable and twisting hooks; double swivel hook (tower side), single hook with nylon roller (conductor side).
– Standard length 12m (4+4+4), other lengths upon request.
– Horizontal working load 300 daN.
– Weight 153 kg.
014 LADDER FOR STEEL AND CONCRETE POLE CLIMBING
Categories: Electrical Transmission
ALUMINUM LADDER WITH SAFETY DEVICE FOR STEEL AND CONCRETE POLE CLIMBING
Suitable for climbing circular and polygonal poles.
For quadrangular poles a special configuration is available upon request.
Made of welded light aluminum alloy (certified TIG system) with skid-proof rungs.
Certified according to UNI CEN/TS 16415:2013, UNI EN 795:2012 regulations and in compliance with EU 2016/425 regulation.
Modular structure with base and top sections and as many intermediate elements as needed to reach the desired length (up to 30m).
The ladder is equipped with two anti-fall devices with anchoring points for operator’s safety belt.
An aluminum alloy service platform for the operator is also available upon request.
Working load: 150 daN
*Higher capacities upon request
NOTE:
To prevent undesired torsions on the structure while operating on high poles (above 30m), a chain-locking device is also available on request. (Mod. 014/BIP).
Weights with standard accessories:
– Self-supporting base 014/B – 5.5 kg
– Intermediate element 014/I – 6 kg
– Upper part element 014/C – 6.5 kg
– Service platform 014/PL – 1 kg
013-TP WORKING PLATFORM
Categories: Electrical Transmission
TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Provided with galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
013-G.GG E 013-TP.GG WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR/TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized foldable and twisting hook Mod. AGG/SS (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Horizontal working load 200 daN (triangular) or 300 daN (trapezoidal).
– Vertical working load 300 daN.
013-G WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized steel hook with safety chain (tower side) and swivelling/foldable hook
Mod. AG/SS (conductor side).
– Horizontal working load 200 daN.
– Vertical working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
011-G SUSPENSION LADDER-PLATFORM
Categories: Electrical Transmission
Suitable for operations on overhead transmission lines, usable both horizontally and vertically.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Complete with interchangeable galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 100 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Reinforced structure with horizontal working load of 200 daN.
How does it work?
1. Contact HTC
Contact our team and select the TEMA ladder that best suits your work.
2. Bring In Your Old Ladder
Trade in your old, damaged, or out-of-cert ladder.
3. Receive 15% Off
Get 15% off your new TEMA ladder when you trade in.
4. Climb with Confidence
Take home a certified, European-made ladder built for safe, reliable live-line and overhead work.
Explore the T.E.M.A. Range
040-TI-12-15-18 TRESTLE LIFTERS SET UP FOR HYDRAULIC HEAD
Categories: Cable Winches and Pullers, Reel Stands, Stringing Blocks
Capacity from 12 to 18 t.
Complete with hydraulic braking system and safety latches.
Suitable for conductor wooden drums or steel reels for aerial stringing operations and underground cabling.
Made in steel with foldable structure for ease of transport.
Drum lifting system by hydraulic jacks.
N°2 hydraulically operated disc brakes to control and adjust the torque force counter-pull, with replaceable brake pads.
Steel shaft on ball-bearings with adjustment wedges.
040-TI HYDRAULIC DRIVEN HEAD
Categories: Cable Winches and Pullers, Reel Stands, Stringing Blocks
Powered either by tensioner/puller machines or remote hydraulic-power unit.
The hydraulic driven head guarantees a synchronized rotation in both directions, from the machine’s control panel.
Capacity from 7 to 12 t (other capacities available upon request).
Maximum torque: 300 daNm
Feed pressure: 150 bar
Maximum speed: 32 r.p.m.
Suitable to be installed on pre-arranged reel stands.
Weight: 80 kg
040-4-7-10 HYDRAULIC REEL STAND
Categories: Cable Winches and Pullers, Reel Stands, Stringing Blocks
Capacity from 4 to 10 t.
Complete with mechanical braking system.
Suitable for conductor wooden drums or steel reels for aerial stringing operations and underground cabling.
Made in steel with foldable structure for ease of transport.
Drum lifting system by hydraulic jacks.
N° 2 mechanical disc brakes to control and adjust the torque force and counter-pull, with replaceable brake pads.
Steel shaft on ball-bearings with adjustment wedges.
Available on request:
– Hydraulic braking system;
– Mechanical locking system
040-12-15-18 HYDRAULIC REEL STAND
Categories: Cable Winches and Pullers, Reel Stands
Capacity from 12 to 18 t.
Complete with hydraulic braking system and safety latches.
Suitable for conductor wooden drums or steel reels for aerial stringing operations and underground cabling.
Made in steel with foldable structure for ease of transport.
Drum lifting system by hydraulic jacks.
N°2 hydraulically operated disc brakes to control and adjust the torque force counterpull, with replaceable brake pads.
Steel shaft on ball-bearings with adjustment wedges.
029 L.V. PREFORMED CABLE STRINGING PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
High tenacity nylon sheaves.
Rope/Conductor-holding brackets on both sheaves.
Overall sheave diameter: 150 mm.
Working load: 200 daN
Breaking load: 1000 daN
Weight: 6 kg
(Ref. Enel: EA0432)
028 TACKLE BLOCKS
Categories: Cable Winches and Pullers, Stringing Blocks
Lifting tackles with steel sheaves mounted on ball-bearings, galvanized steel frame.
Each set consists of two blocks (one pair).
026RBTV8 STRINGING ROLLER
Categories: Cable Winches and Pullers, Stringing Rollers
Suitable to be used with remote controlled pull/drag unit model 101RBT to replace existing earth wire (or conductor).
Pulling rope diameter from 8 to 24 mm.
Self-lubricating nylon sheaves and aluminum alloy frame.
Working load: 200 daN
Breaking load: 1000 daN
Weight: 2,3 kg
026RBTV6 STRINGING ROLLER
Categories: Cable Winches and Pullers, Stringing Rollers
Suitable to be used with remote controlled pull/drag unit model 101RBT to replace existing earth wire (or conductor).
Pulling rope diameter from 10 to 20 mm.
Nylon sheaves on ball-bearings, steel frame with side protections.
Working load: 200 daN
Breaking load: 1000 daN
Weight: 1.4 kg
026RBTV2 STRINGING ROLLER
Categories: Cable Winches and Pullers, Stringing Rollers
Suitable to be used with remote controlled pull/drag unit model 101RBT
to replace existing earth wire (or conductor).
Self-lubricating nylon sheaves and aluminum alloy frame.
Working load: 100 daN
Breaking load: 500 daN
Weight: 0,95 kg
026RBT2 STRINGING ROLLER
Categories: Cable Winches and Pullers, Stringing Rollers
Suitable to be used with remote controlled pull/drag unit model 101RBT to replace existing earth wire (or conductor).
Nylon sheaves on ball-bearings, galvanized steel frame with nylon protection plates.
Working load: 200 daN
Breaking load: 1000 daN
Weight: 1,8 kg
026-E HELICOPTER BLOCK SINGLE CONDUCTOR (ADJUSTABLE ANGLE)
Categories: Cable Winches and Pullers, Stringing Blocks
Designed for HELICOPTER pilot wire laying operations, complete with adjustable angle support for cross-arm.
Molded aluminum alloy sheaves on ball-bearings, interchangeable nylon lining sectors for conductor protection, galvanized steel frame with clevis attachment.
Complete with pilot wire holding bracket and detachable wire-guide rod.
Breaking load: 6000 daN
026-A TWIN SHEAVES CABLE PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
High tenacity nylon sheaves, mounted on ball-bearings,
galvanized steel frame.
Working load: 1000 daN
Breaking load: 5000 daN
Weight: 6 kg
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
