Get 15% off when you trade in your ladder.
Choose your ladder
Eligible
Crafted using premium aluminium alloy with TIG-certified welds for improved durability
High safety standards and compliance with major European norms
Designed for overhead transmission work with robust execution and ergonomic comfort
Still climbing on borrowed time?
If your ladder is pushing the limits of age, wear, or compliance, now’s the perfect time to make a smart switch.
Hand in your old or out-of-cert ladder and step up to a premium, European-made ladder.
Built for high-risk live-line and overhead work, TEMA ladders deliver certified safety, lightweight strength, and ergonomic performance that’s trusted worldwide. Because when it comes to height safety, second-best just won’t do.
Ladder Safety Checklist
Essential checks for ladders used in live line and overhead work.
☐ Inspect Before Every Use
Check for cracked welds, loose rungs, dents, or structural damage.
☐ Test Annually
Ensure your ladder remains safe, compliant, and certified.
☐ Replace When Required
Replace every 5–7 years, or immediately if it fails inspection or testing.
Upgrade your old live‑line ladder for a new TE.M.A ladder via HTC, New Zealand’s distributor for TE.M.A equipment
TE.M.A’s ladders are built of lightweight TIG‑welded aluminium alloy, certified to UNI CEN/TS 16415:2013, UNI EN 795:2012, and compliant with EU 2016/425 PPE regulations.
They feature skid‑proof rungs, galvanized safety hooks, and a 300 daN vertical working load
017 WORKING PLATFORM
Categories: Electrical Transmission
RECTANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof floor “Graepel Gripp system”. galvanized foldable and twisting hooks; double swivel hook (tower side), single hook with nylon roller (conductor side).
– Standard length 12m (4+4+4), other lengths upon request.
– Horizontal working load 300 daN.
– Weight 153 kg.
014 LADDER FOR STEEL AND CONCRETE POLE CLIMBING
Categories: Electrical Transmission
ALUMINUM LADDER WITH SAFETY DEVICE FOR STEEL AND CONCRETE POLE CLIMBING
Suitable for climbing circular and polygonal poles.
For quadrangular poles a special configuration is available upon request.
Made of welded light aluminum alloy (certified TIG system) with skid-proof rungs.
Certified according to UNI CEN/TS 16415:2013, UNI EN 795:2012 regulations and in compliance with EU 2016/425 regulation.
Modular structure with base and top sections and as many intermediate elements as needed to reach the desired length (up to 30m).
The ladder is equipped with two anti-fall devices with anchoring points for operator’s safety belt.
An aluminum alloy service platform for the operator is also available upon request.
Working load: 150 daN
*Higher capacities upon request
NOTE:
To prevent undesired torsions on the structure while operating on high poles (above 30m), a chain-locking device is also available on request. (Mod. 014/BIP).
Weights with standard accessories:
– Self-supporting base 014/B – 5.5 kg
– Intermediate element 014/I – 6 kg
– Upper part element 014/C – 6.5 kg
– Service platform 014/PL – 1 kg
013-TP WORKING PLATFORM
Categories: Electrical Transmission
TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Provided with galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
013-G.GG E 013-TP.GG WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR/TRAPEZOIDAL SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized foldable and twisting hook Mod. AGG/SS (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Horizontal working load 200 daN (triangular) or 300 daN (trapezoidal).
– Vertical working load 300 daN.
013-G WORKING PLATFORM
Categories: Electrical Transmission
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTURE
Suitable to be used on vertical as well as horizontal position.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs galvanized steel hook with safety chain (tower side) and swivelling/foldable hook
Mod. AG/SS (conductor side).
– Horizontal working load 200 daN.
– Vertical working load 300 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Tower-side hook with opening size up to 400mm;
– Different lengths and compositions.
011-G SUSPENSION LADDER-PLATFORM
Categories: Electrical Transmission
Suitable for operations on overhead transmission lines, usable both horizontally and vertically.
Made of light aluminum alloy, welded (Certified TIG system) with skid-proof rungs.
Complete with interchangeable galvanized steel hook with safety chain (tower side) and swivelling/foldable hook Mod. AG/SS (conductor side).
– Vertical working load 300 daN.
– Horizontal working load 100 daN.
Upon request:
– Adjustable/folding conductor side hook with nylon wheel Mod. AG/SS-R;
– Reinforced structure with horizontal working load of 200 daN.
How does it work?
1. Contact HTC
Contact our team and select the TEMA ladder that best suits your work.
2. Bring In Your Old Ladder
Trade in your old, damaged, or out-of-cert ladder.
3. Receive 15% Off
Get 15% off your new TEMA ladder when you trade in.
4. Climb with Confidence
Take home a certified, European-made ladder built for safe, reliable live-line and overhead work.
Explore the T.E.M.A. Range
026-6 CABLE PULLEY-BLOCK (ANGLED)
Categories: Cable Winches and Pullers, Stringing Blocks
Suitable to be mounted on angled insulator bracket.
For both models:
Working load: 200 daN
Breaking load: 600 daN
Weight 2,5 kg
026-5 CABLE PULLEY-BLOCK (STRAIGHT)
Categories: Cable Winches and Pullers, Stringing Blocks
Suitable to be mounted on upright insulator bracket.
High tenacity nylon sheave, mounted on ball-bearings.
Galvanized steel frame.
Adjustable rope-holding bracket device.
Overall sheave diameter: 150 mm.
026-2 L.V. PREFORMED CABLE STRINGING PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
Nylon sheave mounted on ball-bearings.
Galvanized steel frame swivel hook and adjustable rope-holding bracket.
Working load: 500 daN
Breaking load: 2500 daN
Weight: 4 kg
026-1 BARE CONDUCTOR AND L.V. PERFORMED CABLE STRINGING PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
High tenacity nylon sheaves, mounted on ball-bearings.
Galvanized steel frame.
Swivel hook and adjustable rope-holding bracket.
Working load 200 daN
Breaking load 1000 daN
Weight: 2,5 kg
026 TOWER-TOP RUNNING OUT ROLLERS FOR HELICOPTER PILOT WIRE DEPLOYMENT
Categories: Cable Winches and Pullers, Stringing Rollers
Suitable for HELICOPTER pilot wire laying operations.
Nylon rollers on ball-bearings, galvanized steel frame complete with “V” shape detachable rope-guide and tower-top mounting brackets.
0251AS PULL-DOWN PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
Designed to keep the pilot rope as well as conductor in the proper position while stringing between towers having a substantial height difference.
Automatic quick-release device.
Galvanized steel frame and wheel on ball-bearings.
Working load: 26 kN
Weight: 20 kg
025…AS HOLD-DOWN PULLEY-BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
Suitable for conductor stringing operations at the tower top position when operating on towers with significant height difference.
Molded aluminum alloy sheave on ball-bearings, interchangeable nylon lining sectors for conductor protection.
Opening galvanized steel frame with top and bottom swivelling clevis attachment.
025-TANDEM TANDEM CONFIGURATION PULLEY BLOCKS
Categories: Cable Winches and Pullers, Stringing Blocks
“Tandem” configuration is obtained by connecting two standard pulleys (single or multiple, standard or for helicopter use) with a dedicated galvanized steel frame kit.
Also available on request “tandem” pulley with integrated frame (fixed frame).
025-SC 3 BUNDLED CONDUCTOR STRINGING BLOCKS DETACHABLE FRAME VERSION
Categories: Cable Winches and Pullers, Stringing Blocks
For twin and triple bundled conductors stringing operations.
Molded aluminum alloy sheaves on ball-bearings, interchangeable nylon (or aluminum) lining sectors for conductor protection.
Galvanized steel frame with 90° orientable clevis attachment suspension point, designed to accommodate complete single sheave rollers Mod. 025/…
Available on request:
– Sheave’s grounding device (Mod. 025/…/… MT) with 50mm² insulated copper cable L=6m
(other lengths on request) with grounding clamp;
– Interchangeable nylon lining sectors kit (Mod. NYR/…);
– Interchangeable aluminum lining sectors kit (Mod. ALR/…);
– Different spacing between sheave centres.
025-SC 5 BUNDLED CONDUCTOR STRINGING BLOCKS DETACHABLE FRAME VERSION
Categories: Cable Winches and Pullers, Stringing Blocks
For quad bundled conductors stringing operations.
Molded aluminum alloy sheaves on ball-bearings, interchangeable nylon (or aluminum) lining sectors for conductor protection.
Galvanized steel frame with 90° orientable clevis attachment.
Available on request:
– Sheave’s grounding device (Mod. 025/…/… MT) with 50mm² insulated copper
cable L=6m (other lengths on request) with grounding clamp;
– Interchangeable nylon lining sectors kit (Mod. NYR/…);
– Interchangeable aluminum lining sectors kit (Mod. ALR/…);
– Different spacing between sheave centres.
025-3 BUNDLED CONDUCTOR STRINGING BLOCK
Categories: Cable Winches and Pullers, Stringing Blocks
For twin and triple bundled conductors stringing operations.
Molded aluminum alloy sheaves on ball-bearings, interchangeable nylon (or aluminum) lining sectors for conductor protection.
Galvanized steel frame with 90° orientable clevis attachment.
Available on request:
– Sheave’s grounding device (Mod. 025/…/… MT) with 50mm² insulated copper cable
L=6m (other lengths on request) with grounding clamp;
– Interchangeable nylon lining sectors kit (Mod. NYR/…);
– Interchangeable aluminum lining sectors kit (Mod. ALR/…);
– Different spacing between sheave centres.
025 E HELICOPTER STRINGING BLOCK FOR SINGLE CONDUCTOR
Categories: Cable Winches and Pullers, Stringing Blocks
Designed for helicopter pilot wire laying operations. Molded aluminum alloy sheaves on ball-bearings, interchangeable nylon lining sectors for conductor protection, galvanized steel frame with swivel clevis attachment.
Complete with pilot wire holding bracket and detachable wire-guide rod.
Available on request:
– Sheave’s grounding device (Mod. 025/…/… MT) with 50mm² insulated copper
cable L=6m (other lengths on request) with grounding clamp;
– Interchangeable nylon lining sectors kit (Mod. NYR/…);
– Interchangeable aluminum lining sectors kit (Mod. ALR/…);
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
