Heavy-Duty Cable Handling & Lifting Solutions You Can Rely On
Heavy-duty cable handling and lifting solutions built for demanding electrical, utility, and infrastructure environments. HTC supplies trusted, field-ready equipment designed to improve safety, efficiency, and performance across cable installation, maintenance, and handling applications throughout New Zealand.
For All Your Cable Handling Solutions
Hearthill Caddy rope carrier
Categories: Cable Installation Accessories, Drum Handling Equipment
CRC-600 Caddy Rope Carrier
This caddy is manufactured with mandrel bent pipe work to aid with strength. Complete with drum seated on greaseable bearings, crank handle and 2 x pneumatic wheels for mobility over rugged terrain.
Capacity is;
2100 metres of 6mm
1300 metres of 8mm
550 metres of 12mm
320 metres of 16mm
Frame is powder coated, barrel Chrome zinc plated finish
Hearthill Cable Drum Trolley
Categories: Cable Installation Accessories, Drum Handling Equipment
CDT-500 Cable Drum trolley with four mounting positions.
Lower position for up to 750mmø drum
Highest position for up to 1500mmø drum
Comes complete with two pneumatic pump up wheels and a solid rubber/plastic wheel with brake at the rear. Spindle and two retaining collars also supplied, cones are addition extra.
Now in black powder coated finish.
Approximate frame dimension – 1285 x 1745 x 1000mm
Approximate folded dimension – 1285 x 1340 x 335mm
Wooden Pole Working Platform
Categories: Aerial Equipment, Cable Installation Accessories
The WPP-1200 Wooden Pole Platform is a standing platform measuring 1060 x 460mm, with anti-slip surface.
- High tensile chain is supplied to suit wooden power poles up to 750mm in diameter.
- Tested and certified to working load limit 150kg.
- Framework is zinc plated.
Wooden pole platform
Categories: Aerial Equipment, Cable Installation Accessories
WPP-860 Wooden Pole Platform
Made from steel and marine ply, finished in chrome zinc plate. This unit is rated to a working load limit of 150kg. Standing platform measures 350 x 650mm, 3mm rubber is adhered for insulation and anti-slip properties.
Will suit wooden power poles up to 400mm in diameter.
In-line cable guide with 4V + 2H rollers
Categories: Aerial Equipment, Cable Installation Accessories
This type of crossarm roller is for pulling over wooden cross arms with minor directional deviations.
WCAR-100 In-line cable guide with 2V & 2H rollers for 100mm cross arms
WCAR-150 In-line cable guide with 2V & 2H rollers for 150mm cross arms
WCAR4-100 In-line cable guide with 4V & 2H rollers for 100mm cross arms
WCAR4-150 In-line cable guide with 4V & 2H rollers for 150mm cross arms
Chrome zinc plated finish
In-line cable guide with 2V + 2H rollers
Categories: Aerial Equipment, Cable Installation Accessories
This type of crossarm roller is for pulling over wooden cross arms with minor directional deviations.
WCAR-100 In-line cable guide with 2V & 2H rollers for 100mm cross arms
WCAR-150 In-line cable guide with 2V & 2H rollers for 150mm cross arms
WCAR4-100 In-line cable guide with 4V & 2H rollers for 100mm cross arms
WCAR4-150 In-line cable guide with 4V & 2H rollers for 150mm cross arms
Chrome zinc plated finish
External corner roller guide
Categories: Aerial Equipment, Cable Installation Accessories
WCCR-XXX External Corner Roller Guide
These roller units are for use on external corners on wooden crossarmsor use on crossarmsthat are occupied and requires an offset roller guide.
WCCR-100 for 100mm wooden cross arms
WCCR-150 for 150mm wooden cross arms
Chrome zinc plated finish
Universal in-line roller guide for wooden cross arms
Categories: Aerial Equipment, Cable Installation Accessories
No Long Description
In-line sagging cable roller guide
Categories: Aerial Equipment, Cable Installation Accessories
The wooden cross arm sagging roller is placed at the start of the pull or at height differential power poles. The cable drum is placed away from the first pole and the cable pulled up onto the increased radius of the horizontal rollers.
WCASR-100 for 100mm wooden cross arms
WCASR-150 for 150mm wooden cross arms
Chrome zinc plated finish
Triple Roller Cable Guide
Categories: Aerial Equipment, Cable Installation Accessories
TRCG-140 Triple Roller Cable Guide
This aerial unit consists of two aluminium side plates assembled together with three ALR-140 aluminium sheaves. To suit up to a maximum 150mm diameter cable, the middle roller is adjustable for a radius ranging from 860 – 2500mm.
Assembled complete with 360° swivelling safety hook.
Certified to a Working load limit of 1000kg
Stringing contact roller with single/double wheel
Categories: Aerial Equipment, Cable Installation Accessories
Made from steel for durability to withstand wear from aluminium catenary wire. Chrome zinc plated finish.
Parallel Earth Roller Guide
Categories: Aerial Equipment, Cable Installation Accessories
This Parallel Earthing roller guide doubles as use for both hooking onto catenary wires and a stake for earthing.
- Assembled with a single PR-40 this unit can also be used as guide rollers for cables up to 35mm in diametre.
- Chrome zinc plated mild steel
Watch the tools that make hard jobs easy in action!
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
