Heavy-Duty Cable Handling & Lifting Solutions You Can Rely On
Heavy-duty cable handling and lifting solutions built for demanding electrical, utility, and infrastructure environments. HTC supplies trusted, field-ready equipment designed to improve safety, efficiency, and performance across cable installation, maintenance, and handling applications throughout New Zealand.
For All Your Cable Handling Solutions
Cross arm support bracket
Categories: Aerial Equipment, Cable Installation Accessories
CASB-800 Cross Arm Support Bracket
This Crossarm Support Bracket is manufactured with aluminium parts and is assembled with HDPE rollers to minimize weight. Each unit comes complete with ratchet and strap for fixing onto all types of power poles.
Certified Working Load Limit of 100kg.
Cross arm ratchet roller
Categories: Aerial Equipment, Cable Installation Accessories
CARR-080/140 Cross Arm Ratchet Roller
Ratchet roller with aluminium sheave for all types of cross arms. Assembled with either ALR-115 or ALR-150 for bundled cables up to 100mm and 150mm diameter. Both units feature a rubberized base to eliminate slipping and gravity locking arm to prevent cables running off.
Chrome zinc plated finish
ASRUR145-60 clamp for 75m to 150mm crossarm
Categories: Aerial Equipment, Cable Installation Accessories
Clamp for use with crossarms up to 150mm wide.
ASRU145-60 Clamp
Categories: Aerial Equipment, Cable Installation Accessories
Clamp for use with crossarms up to 150mm wide.
Aerial Stringing Roller
Categories: Aerial Equipment, Cable Installation Accessories
ASRG-080 Aerial Stringing Roller Guide
This aerial roller guide is assembled with 4 x ALR-115 consecutively to achieve a bending radius of 320mm. Pivoting at the middle gives the roller assembly direction flexibility.
Also featuring a safety hook with latch on a swivelling clevis creates a really versatile piece of equipment.
Will suit cables up to 105mm in diameter.
Chrome zinc plated finish
Adaptor for APBV-30
Categories: Aerial Equipment, Cable Installation Accessories
APBH-50 Adaptor to change the APBV-30 from a horizontal to vertical pulling scenario.
Pole Bracket for the AFGs
Categories: Aerial Equipment, Cable Installation Accessories
APBV-30 Pole bracket for AFG type rollers. For cable pulling in a horizontal motion.
Aerial Fibre Guide for 90 Degree Bends
Categories: Aerial Equipment, Cable Installation Accessories
The AFG90-X Aerial Fibre Guide is a power pole mounted roller, available in either a single or double row of rollers.
- Additional rows are available upon request.
- The AFG-90 has a set bending radius of 470mm and is assembled with polypropylene rollers. Each unit features 2 top rollers to lock the cable in place during service.
- The AFG90-X is designed for 90° bends with X being the number of rows of rollers.
- Suit cables up to 35mm in diameter.
- Framework is Chrome zinc plated.
Hearthill Aerial Fibre Guide for 45 Degree Bends
Categories: Aerial Equipment, Cable Installation Accessories
This power pole mounted roller comes in either a single or double row of rollers however additional rows are available upon request.
- The AFG45-X is shorter than the AFG-90 and are set at 45° bends which can also be used as chutes.
- It has a set bending radius of 470mm and is assembled with polypropylene rollers.
- Each unit features 2 top rollers to lock the cable in place during service. Suit cables up to 35mm in diameter.
- Framework is Chrome zinc plated.
Hearthill Aerial Single Cable Block
Categories: Aerial Equipment, Cable Installation Accessories
ASCB-080 Aerial Stringing Cable Block
Aerial stringing cable block with aluminium sheave to suit cables up to ø105mm encapsulated by thread and handle screw.
Hook with safety latch is linked to a clevis which gives the whole unit a universal pivot and swivelling motion once installed and in operation.
Certified to a Working load limit of 500kg
Chrome zinc plated finish
Aerial Pulley Block
Categories: Aerial Equipment, Cable Installation Accessories
APB-1100 Aerial pulley block
This aerial roller guide will suit cables up to 22mm with its nylon pulley. Aided with internal bearings to reduce drag whilst servicing. Made from pressed steel this unit is light weight and effective for overhead operations.
Certified to a working load limit of 600kg.
Chrome zinc plated finish.
Aerial Cable Block
Categories: Aerial Equipment, Cable Installation Accessories
ACB145-60 Aerial Cable Block
This aerial roller guide is assembled complete with lifting hook with spring safety latch to a clevis for 360º swivel motion. Side latch with spring lock to encapsulate cable. Assembled with aluminium roller and bearings.
Roller dimensions – 150mm (flange) x 50mm (width) x 78mm (waist)
Certified to a Working Load Limit of 2,000kg
Zinc plated finish
Watch the tools that make hard jobs easy in action!
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
