Heavy-Duty Cable Handling & Lifting Solutions You Can Rely On
Heavy-duty cable handling and lifting solutions built for demanding electrical, utility, and infrastructure environments. HTC supplies trusted, field-ready equipment designed to improve safety, efficiency, and performance across cable installation, maintenance, and handling applications throughout New Zealand.
For All Your Cable Handling Solutions
Metal Crossarm External Corner Roller
Categories: Aerial Equipment, Cable Installation Accessories
The MCAR-100EX Metal Crossarm External Roller is designed to be mounted internally for cable hauling around corners.
- Assembled complete with internal bearings, 2 x horizontal and 4 x vertical steel tubular rollers and 2 x HDPE top latches to encapsulate cable during service.
- Chrome zinc plated finish.
Extended Insulator Top Cable Bracket
Categories: Aerial Equipment, Cable Installation Accessories
- Designed for line post insulators, with a much smaller neck this unit has been fitted with polyethylene pads to both protect the insulator and reduce friction when rotating the unit.
- This insulator cable bracket also features tubular rollers with bearings at each end to reduce pulling friction when drawing cable.
- Chrome zinc plate finish.
- Unit weighs 6.5kg.
Top Cable Bracket Guide-45 degree Angled Insulator
Categories: Aerial Equipment, Cable Installation Accessories
Like its predecessors this insulator cable guide clamps onto the porcelain neck and will encapsulate cables for pulling in both straight line and around bends. It also has a protective base to eliminate damage whilst clamping and is adjustable for larger insulators.
Chrome zinc plated finish
Insulator Top Cable Bracket Guide
Categories: Aerial Equipment, Cable Installation Accessories
The ICB-040B Insulator Cable Bracket has moulded polyurethane inserts to avoid damaging the insulator and has been tested and certified to a WLL of 250Kg.
- Adjustable connecting lugs also makes this unit suitable for different insulator neck sizes.
- The beauty of this piece of equipment is that once attached to the insulator you don’t need to remove it to position the cable in the top groove.
- Simply loosen off the clamp and spin the ICB in a clockwise direction and the cable will fall into position for installation.
- Chrome zinc plate finish.
In-line Cable Guide for Cross Arms
Categories: Aerial Equipment, Cable Installation Accessories
FCARR-100 Inline Cable Guide for Cross Arms
In-line cable guide with a rubberized base that may be used on any type of crossarm. Each unit is assembled complete with 2 vertical and 2 horizontal rollers and a locking gate. Fixed onto crossarms by a ratchet and strap.
Chrome zinc plated finish
Box Type Cable Tray Roller
Categories: Aerial Equipment, Cable Installation Accessories
CTR-360 Box Type Cable Tray Roller
This simple box type cable tray and ladder roller features a 110 x 45mm cross section with lead in flaps to aid with the entering and existing of cables. This unit will suit cable ladders with rungs approximately 360mm apart and has holes in place for securing.
Chrome zinc plated finish
Cable Tray Roller up to 165mm
Categories: Aerial Equipment, Cable Installation Accessories
Cable Tray Roller with 165mm² window for cable placement
Chrome zinc plated finish
Cable Tray Roller up to 80mm
Categories: Aerial Equipment, Cable Installation Accessories
CTR-60C-5R Cable Tray Roller with 60mm Cross Section
This roller unit will suit both cable tray and cable ladder types. It is assembled with a total of five tubular rollers with internal bearings. Top roller of which can be unlocked via screw for easy removal of cables in an 80mm cross section. Clamping supports of up to 60mm this unit can be used with many ladder and tray makes and difficult situations.
Chrome zinc plate finish
Universal Cable Tray Roller
Categories: Aerial Equipment, Cable Installation Accessories
This CTR-50 Universal Cable Tray Roller guide can be secured to many differing types and makes of cable ladders and trays.
- Adaptor arms are included for fixing as shown.
- Now with a total of 4 tubular rollers this unit will hold a cable up to 60mm in diameter and will assist in cable pulls in all directions including inclining, declining and around bends.
- Chrome zinc plated finish.
Cable Tray Roller
Categories: Aerial Equipment, Cable Installation Accessories
CTR-165X Cable Tray Roller 165mm²
Cable Tray Roller with 165mm² window for cable placement
Chrome zinc plated finish
Cable Tray Roller Guide
Categories: Aerial Equipment, Cable Installation Accessories
CTR-140/CTRA-140 Cable Tray Roller Guide with Extension Arms
Simple and effective cable tray rollers that will suit both cable trays and cable ladders with rungs up to 600mm apart. Each unit comes complete with bolts, nylock nuts and 2 x 600mm long rung arms.
Plastic or aluminium roller versions available.
Chrome zinc plated finish
Hearthill Catenary Stringing Roller for Single Cable
Categories: Aerial Equipment, Cable Installation Accessories
CSR-010 Catenary Roller for Single Cables
Designed for railway and tram lines and other light duty cable hauling on catenary wires. They are also used in between poles to support the cables prior to and during lashing operations. Made of spring steel and is assembled with PR-40 to accommodate cables up to 35mm diameter.
Watch the tools that make hard jobs easy in action!
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
