Heavy-Duty Cable Handling & Lifting Solutions You Can Rely On
Heavy-duty cable handling and lifting solutions built for demanding electrical, utility, and infrastructure environments. HTC supplies trusted, field-ready equipment designed to improve safety, efficiency, and performance across cable installation, maintenance, and handling applications throughout New Zealand.
For All Your Cable Handling Solutions
Triple Roller Guide for Manholes
Categories: Cable Installation Accessories, Underground Equipment
The TRGM100-3 Triple Roller Cable Guide for Manholes should be used when there is a sharp bend.
- The 3 x ALR-150 will dramatically reduce the dragging friction when hauling cables up to 145mm in diameter.
- These manhole roller guides can sit either on top of the manhole edge or even be set up in the manhole for corner pulls.
- The ALR-140 rollers come with sealed bearings and will cables up to 145mm in diameter.
- Chrome zinc plated finish.
Twin roller guide for manholes
Categories: Cable Installation Accessories, Underground Equipment
TRGM-100-2, Twin Roller Cable Guide for Manholes
Twin roller cable guide to eliminate cable abrasions during hauling with minor incline/declines. These manhole roller guides can sit either on top of the manhole edge or even be set up in the manhole for corner pulls. The ALR-140 rollers come with sealed bearings and will cables up to 145mm in diameter.
Chrome zinc plated finish
Single roller guide for manholes
Categories: Cable Installation Accessories, Underground Equipment
TRGM-100 Single Roller Guide for Manholes
Trench roller guide for use with cables entering trenches of manholes and pits with gradual descent. These manhole roller guides can sit either on top of the manhole edge or even be set up in the manhole for corner pulls. The ALR-140 rollers come with sealed bearings and will cables up to 145mm in diameter.
Chrome zinc plated finish
Heavy duty 2.5 T trench roller guide
Categories: Cable Installation Accessories, Underground Equipment
Heavy duty corner roller complete with sealed bearings within the ø76mm roller. The supporting frame features laser cut holes for bolting down and a handle for mobility.
Chrome zinc plated finish.
Hearthill Trench Corner Roller Guide and Inverted Roller Guide
Categories: Cable Installation Accessories, Underground Equipment
Engineered for smooth cable management, the Hearthill Trench Corner Roller Guide and Inverted Roller Guide ensure efficient, low-friction movement. Built for durability and stability, they optimize cable handling in trenching and overhead applications, reducing wear and enhancing performance. Ideal for industrial and utility use.
Raised Trench Roller with Plastic/Aluminium Roller
Categories: Cable Installation Accessories, Underground Equipment
The RTR/RTRA-XXX Raised Trench Roller Guide is designed for instances where an existing cable or conduit is in place.
- Like its predecessors the roller is placed behind the direction of pull and is offset from centre to reduce the possibility of the roller tipping forward during pulling operations.
- Chrome zinc plated finish.
Rubber slug
Categories: Cable Installation Accessories, Underground Equipment
The rubber slug is use to spread lubricant down a conduit. They come in sizes to suit conduits from 50mm to 200mm.
For conduits below 80mm please specify whether it is to service a telecommunication or electrical conduit. Custom sizes are also available upon request.
Chrome zinc plated finish.
Pivoting manhole roller guide
Categories: Cable Installation Accessories, Underground Equipment
Pivoting manhole roller guide for cables. The pivoting allows the rollers to centre themselves with the direction of the cable. Chrome zinc plated finish.
Pivoting manhole cable guide
Categories: Cable Installation Accessories, Underground Equipment
Pivoting manhole cable guide which uses a slipper instead of rollers makes this unit effective and economical. Chrome zinc plated finish.
In line feeding sheave
Categories: Cable Installation Accessories, Underground Equipment
IFS-XXX In-line Feeding Sheave
To be placed inside the conduit, using the “bell mouth” to aid the entering and exit of cables.
For conduits below 80mm please specify whether it is to service a telecommunication or electrical conduit.
Chrome zinc plated finish
Lockable feeding sheave with 4 rollers in 90°radius
Categories: Cable Installation Accessories, Underground Equipment
FS-XXX-4A90 Lockable feeding sheave with 4 rollers in 90° radius
Lockable angled guiding rollers for manholes are set at 90° with a radius of 450mm.
Suitable for directional changes within a manhole. The support frame rests against the wall offering added strength should the pull require it.
Chrome zinc plated finish
Lockable multiple roller guide
Categories: Cable Installation Accessories, Underground Equipment
FS-XXX-4R Lockable Multiple Roller Guide
The quad roller is a multi directional roller guide.
Lockable by a tension bolt this sheave has the added benefit of a hinged top roller for removal of cable and roller guide from conduit.
Chrome zinc plated finish
Watch the tools that make hard jobs easy in action!
Why HTC?
You’re not just getting a tool—you’re getting support from a team that understands real job site demands.
Being able to book in time for calibration…
Being able to book in time for calibration, less time without equipment was mint. Easy pickup as you are just down the road. Very help
Repair technician was very helpful…
Repair technician was very helpful and knew what he was talking about…got our bender repaired quickly.
The repeated personal service, expertise and the way…
The repeated personal service, expertise and the way we can talk to a person who has a great knowledge and understanding for what is required…is
