Plumettaz TL 3022 DRE Electric Capstan Winch Trailer
The Plumettaz TL 3022 DRE-1050/9 is a battery-electric trailer-mounted capstan winch for underground telecommunications and power cable laying in pre-installed ducts, open trenches, and subducting operations. Delivers 3,000 daN pulling force in 1st gear with 1,050 m of 9 mm rope. Powered by two high-powered batteries for 4+ hours of continuous operation — rechargeable from mains, generator, or vehicle charging points. Silent operation for night and urban work. Remote Monitoring digital service included as standard.
More Information
The Plumettaz TL 3022 DRE-1050/9 E-Winch is the electric evolution of the trailer capstan winch — 3,000 daN pulling force, 1,050 m rope capacity, and battery-powered operation that works in closed environments, urban sites, and through the night.
Key Features
-
-
- Battery-electric drive — two high-powered batteries deliver 4+ hours of continuous operation; rechargeable from mains, generator, or vehicle charging points
- 3,000 daN pulling force in 1st gear — 500 daN in 2nd gear for high-speed rope pay-in at 0–75 m/min
- Silent electric operation — no exhaust emissions; suitable for confined spaces, tunnels, urban environments, and night-time cable laying
- 1,050 m rope capacity — 9 mm rope; dual-speed capstan covers 0–20 m/min in 1st gear and 0–75 m/min in 2nd gear
- Dual capstan system — constant speed and force; automatic rope storage via swivelling pulley for low-tension winding regardless of pulling force
- Automatic overload limiter — stops the winch instantly on overload; reverse gear for safe and controlled rope unwinding
- Remote Monitoring digital service — included as standard; monitor and record installation values in real time
- Road-ready trailer — suspension axle and removable polyester hood; compact enough for tight urban access
-
Typical Applications
-
-
- Underground telecommunications and power cable laying in pre-installed ducts
- Open trench cable installation
- Subducting operations
- Urban and night-time cable pulling where low noise and zero emissions are required
- Confined spaces and tunnel environments where combustion engines are prohibited
-
How It Compares — TL 3022 Family
| Spec | TL 3022 DRE-1050/9 | TL 3022 DRHZ-1050/9 | TL 3022 DRH-1050/9 |
|---|---|---|---|
| Drive | Electric | Hydraulic | Hydraulic |
| Engine / Motor | Electric 9 kW | Hatz Diesel 9.6 kW | Honda GX630 15.5 kW |
| Hydraulic Pressure (bar) | — | 160 | 160 |
| Max. Pull 1st Gear (daN) | 3,000 | 3,000 | 3,000 |
| Max. Pull 2nd Gear (daN) | 500 | 700 | 700 |
| Pay-in Speed 1st Gear (m/min) | 0–20 | 0–18 | 0–20 |
| Pay-in Speed 2nd Gear (m/min) | 0–75 | 0–68 | 0–80 |
| Pay-out Speed (m/min) | 0–75 | 0–68 | 0–80 |
| Remote Monitoring | Yes | — | — |
| Weight without rope (kg) | 905 | 928 | 853 |
📊 Specifications
| Spec | TL 3022 DRE-1050/9 |
|---|---|
| Standard Version | Capstan-winch |
| Type | TL 3022 DRE 1050/9 |
| Rope Diameter (mm) | 9 |
| Max. Rope Length (m) | 1,050 |
| Drive Unit | Electric |
| Engine / Motor | Electric |
| Max. Power (kW) | 9 |
| Max. RPM (min⁻¹) | 3,000 |
| Max. Pulling Force 1st Gear (daN) | 3,000 |
| Max. Pulling Force 2nd Gear (daN) | 500 |
| Pay-in Speed 1st Gear (m/min) | 0–20 |
| Pay-in Speed 2nd Gear (m/min) | 0–75 |
| Pay-out Speed (m/min) | 0–75 |
| Remote Monitoring | Yes |
| Length, handlebar high (mm) | 4,060 |
| Width (mm) | 1,710 |
| Height, wheels high (mm) | 1,550 |
| Weight without rope (kg) | 905 |
Standard equipment: Dual capstan system · Automatic overload limiter · Reverse gear · Automatic rope storage via swivelling pulley · Suspension axle trailer · Removable polyester hood · Two high-powered batteries · Remote Monitoring digital service
Note: Optional MP 50 electronic assistant available for monitoring and recording pulling force and installation values during operation. Contact HTC for pricing and availability.
