Plumettaz TL 3022 DRH Hydraulic Capstan Winch Trailer
The Plumettaz TL 3022 DRH-1050/9 is a Honda petrol hydraulic trailer-mounted capstan winch for underground telecommunications and power cable laying in pre-installed ducts, open trenches, and subducting operations. Delivers 3,000 daN pulling force in 1st gear and 700 daN in 2nd gear with 1,050 m of 9 mm rope. Powered by a Honda Gasoline GX630 engine at 15.5 kW — the highest-powered variant in the TL 3022 family, delivering the fastest rope pay-in and pay-out speeds in the range. Dual capstan system, automatic overload limiter, and automatic rope storage as standard.
More Information
The Plumettaz TL 3022 DRH-1050/9 is the highest-powered variant in the TL 3022 family — a Honda petrol hydraulic capstan winch delivering 3,000 daN pulling force and the fastest rope speeds in the range, with 1,050 m of rope capacity.
Key Features
-
-
- Honda Gasoline GX630 — 15.5 kW — the most powerful engine in the TL 3022 family; delivers the fastest rope pay-in and pay-out speeds across the range
- Hydraulic drive at 160 bar — smooth, consistent power delivery across both pulling speeds
- 3,000 daN pulling force in 1st gear — 700 daN in 2nd gear for rope pay-in at up to 0–80 m/min
- 1,050 m rope capacity — 9 mm rope; dual-speed capstan covers 0–20 m/min in 1st gear and 0–80 m/min in 2nd gear
- Fastest pay-out speed in the TL 3022 family — 0–80 m/min vs 0–75 m/min (electric) and 0–68 m/min (Hatz diesel)
- Dual capstan system — constant speed and force; automatic rope storage via swivelling pulley for low-tension winding regardless of pulling force
- Automatic overload limiter — stops the winch instantly on overload; reverse gear for safe and controlled rope unwinding
- Road-ready trailer — suspension axle and removable polyester hood; compact enough for tight site access
-
Typical Applications
-
-
- Underground telecommunications and power cable laying in pre-installed ducts
- Open trench cable installation
- Subducting operations
- High-volume cable laying where maximum rope speed is a priority
- Sites with reliable petrol fuel supply and no restrictions on combustion engines
-
How It Compares — TL 3022 Family
| Spec | TL 3022 DRE-1050/9 | TL 3022 DRHZ-1050/9 | TL 3022 DRH-1050/9 |
|---|---|---|---|
| Drive | Electric | Hydraulic | Hydraulic |
| Engine / Motor | Electric 9 kW | Hatz Diesel 9.6 kW | Honda GX630 15.5 kW |
| Hydraulic Pressure (bar) | — | 160 | 160 |
| Max. Pull 1st Gear (daN) | 3,000 | 3,000 | 3,000 |
| Max. Pull 2nd Gear (daN) | 500 | 700 | 700 |
| Pay-in Speed 1st Gear (m/min) | 0–20 | 0–18 | 0–20 |
| Pay-in Speed 2nd Gear (m/min) | 0–75 | 0–68 | 0–80 |
| Pay-out Speed (m/min) | 0–75 | 0–68 | 0–80 |
| Remote Monitoring | Yes | — | — |
| Weight without rope (kg) | 905 | 928 | 853 |
📊 Specifications
| Spec | TL 3022 DRH-1050/9 |
|---|---|
| Standard Version | Capstan-winch |
| Type | TL 3022 DRH 1050/9 |
| Rope Diameter (mm) | 9 |
| Max. Rope Length (m) | 1,050 |
| Drive Unit | Hydraulic |
| Engine / Motor | Honda Gasoline GX630 |
| Max. Power (kW) | 15.5 |
| Max. RPM (min⁻¹) | 3,600 |
| Hydraulic Pressure (bar) | 160 |
| Max. Pulling Force 1st Gear (daN) | 3,000 |
| Max. Pulling Force 2nd Gear (daN) | 700 |
| Pay-in Speed 1st Gear (m/min) | 0–20 |
| Pay-in Speed 2nd Gear (m/min) | 0–80 |
| Pay-out Speed (m/min) | 0–80 |
| Remote Monitoring | — |
| Length, handlebar high (mm) | 4,060 |
| Width (mm) | 1,710 |
| Height, wheels high (mm) | 1,550 |
| Weight without rope (kg) | 853 |
Standard equipment: Dual capstan system · Automatic overload limiter · Reverse gear · Automatic rope storage via swivelling pulley · Suspension axle trailer · Removable polyester hood
Note: Optional MP 50 electronic assistant available for monitoring and recording pulling force and installation values during operation. Remote Monitoring digital service available on the electric TL 3022 DRE-1050/9 variant. Contact HTC for pricing and availability.
