A reliable pneumatic pipe sealing plug for isolating and pressure testing pipes from 150 to 300 mm — inflated with standard compressed air, no specialist equipment required.
Key Features
-
-
- 150–300 mm usable range — suits a wide variety of medium-diameter pipe applications
- 2.5 bar (36 psi) inflation pressure — firm, consistent seal against the pipe wall
- 2.2 bar maximum back pressure — at 150 mm pipe diameter; back pressure rating varies with pipe size
- Supplied with ARO air couplers — compatible with standard compressed air supplies
- 2.6 kg unit weight — manageable for single-operator use in most access conditions
-
Typical Applications
-
-
- Pressure testing of newly installed pipe sections
- Isolating flow for maintenance and repair work
- Diverting lines to bypass damaged or active sections
- Suitable for all pipe materials — concrete, PVC, clay, steel, and HDPE
-
Specifications
| Spec | Detail |
|---|---|
| Model | 60418 |
| Usable Range | 150 – 300 mm |
| Inflation Pressure | 2.5 bar (36 psi) |
| Plug Length | 540 mm |
| Max Back Pressure | 2.2 bar (150 mm) / 2.0 bar (200 mm) / 1.4 bar (250 mm) / 1.2 bar (300 mm) |
| Unit Weight | 2.6 kg |
| Supplied With | ARO air couplers |
Note: Specifications are approximate, model and specifications may vary.
